HDZero Walksnail VRX Mod

thingiverse

You got the HDZero goggles, the Walksnail VRX and the True-RC X-AIR 5.8 MK II but you are fed up with that big black box in the front of your nose ?Then this model is your solution !It's a mod that fit perfectly the VRX and the True-RC antennas on the HDZero goggles with a nice look and only 20mm thicknessesFurthermore, you can add a 45° SMA connector to your hdzero side sma and switch the patch antennas to use the True-RC antennas of your Walknsail VRX on the HDZero system.If you are interested to purchasing a mod kit, if you don't have any 3D printer or don't want to buy whole set of parts then you can contact me on Instagram (@kwazy_fpv)What you need :8 x M2*8mm plastic screws : https://www.amazon.fr/gp/product/B00YBMRAH4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=13 mm thermal pad : https://www.amazon.fr/gp/product/B09WKGPBFV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=12 x 5cm + 2 x 10cm UFL to SMA coaxial adapter : https://fr.aliexpress.com/item/1005001485333162.html?spm=a2g0o.order_list.order_list_main.35.6cd75e5bwNIQ5F&gatewayAdapt=glo2fraInstruction :Decase your VRX by taking off the main board, the navigation button board and the fan with his foam (keep the screws of the fan).Assemble the 3 pieces with the 2 top screwThen put the fan with the foam in placeInstall the two shorts UFL-SMA adapter in the top holes of the black pieceConnect them to antenna 1 and antenna 2Then connect the two long UFL-SMA adapter with antenna 3 and 4Install the navigation button board and connect back the fan connectorReplace the thermal pad with the 3mm onePlace the main board and screw the 4 corner screws (make sure everything is in place and that no wire is stuck, the two long UFL-SMA adapter should go out of the vrx from the top of the board, near the top SMA)Put the 2 sides screwsPlace the two side SMAFinally, put your VRX on the HDZero gogglesGo out and fly :)Feel free to ask if you got any trouble