HDD Caddy 1-4 SSDs to 5.25 bay
thingiverse
Needed information on pictures is appreciated.\nSupport requests are unnecessary at this time. The layer height used was 0.2 mm. Infill levels were set between 10% to 15%. PLA filament is being used for the caddy. Both PLA and ABS filaments can be used for front panels.\nIf you like my work, please donate on my website.\nPrint Settings\nPrinter: TRENDi Maker V3\nRafts are not required\nNo supports were needed\nResolution was set to 0.2 mm\nInfill levels ranged from 10% to 15%\nNotes: When installing front panels, a slight allowance is acceptable when using a 0.4 mm nozzle. However, with a 0.3 mm nozzle, it may be loose fitting. A 0.5 mm nozzle will likely make it difficult to fit.
With this file you will be able to print HDD Caddy 1-4 SSDs to 5.25 bay with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on HDD Caddy 1-4 SSDs to 5.25 bay.