Harry Potter - Desk Lamp (Ikea LAMPAN Re-use)

cults3d

I had 2 Ikea LAMPAN desk lamps on my bedroom but were tired of it. My wife is a huge Harry Potter fan so I decided to design this model. She absolutely loved it! It took me a lot of hours designing this so I hope you all enjoy. This model is printed in 4 parts: Part 1 - Body Part 2 - Cover Part 3 - Base Part 4 - Lithophane It requires assembly after printing. It has been design to re-use the electric parts of the IKEA LAMPAN Desk Lamp. Instructions: -Print all 4 parts using my recommended settings; - Insert the Part 4 (Lithophane) into the base (Part 3). You will have to force it a little bit but it will fit under pressure. I had to do it this way so it doesn't get loose with time; - Disassembly the IKEA LAMP Desk Lamp. We will use the cord, the Bulb Socket and the E14 Light Bulb; - Insert the previous assembly (Part 3+4) into the body (Part 1) gently. The pins are very fragile. Use a few drops of super glue around the hole and the pins. Make sure that you have a strong connection between parts. Wait for it to dry before continue to the next step; - Pass the cord through the hole of the body and connect it to the bulb socket; - Insert the bulb socket into the body. You don't need glue on this one, just press it a little bit; - Connect the E14 Bulb; - Insert the Cover in the top of the lamp. Once again, you will have to press it a little bit but be gentil to not damage the whole lamp. It will fit. - Done! Enjoy your Harry Potter themed lamp :) IMPORTANT NOTES: If you don't have an IKEA LAMPAN, you will need to buy an E14 Bulb Socket with 27mm and a cord. Just make sure that the bulb socket will fit in the space. If you have any trouble assembling this, just contact me!