Hard drive and SSD caddy for HP Z600 Z620 Z800 XW6600 XW8600

thingiverse

This is a caddy for HP workstations Z600, Z620, Z800, XW6600, and XW8600, or any system with at least two 5.25-inch spaces available. The caddy can be secured using its built-in latch, but it fits tightly enough to secure itself through friction alone. It accommodates two 3.5-inch drives plus three 2.5-inch drives. Two of the 2.5-inch drives can be either SSDs or HDDs with a thickness between 7 and 13.5mm, while the third drive will fit a 7mm SSD only. +++++++++++++ I uploaded a RAID version that allows users to replace the 3.5-inch drives with additional 2.5-inch drives or combine them in any valid way (nine 2.5-inch drives or five 2.5-inch drives plus two 3.5-inch drives). If no 3.5-inch drives are used, one-inch spacers must be employed to maintain the original dimensions. Commercial brass M3 spacers can be purchased or eight M3 nuts can be used as substitutes. A design has been included for printing purposes; it can be printed as many times as needed. Thirty millimeter M3 screws should be utilized inside the spacers.