Happy Newyear 2020

thingiverse

New Year is just around the corner and I'm excited to share a fun project with you - making New Year decorations! You can customize it by adjusting the stick heights and choosing your own decorations. I always print with PETG, and the fuzzy decoration turned out perfectly. If you encounter any issues printing it in PLA, please let me know so I can help troubleshoot. Below are some additional printing details for each part: Happy New Year 2020 --------------------------- This is the base stand with the text Happy New Year 2020. The stand has four holes where you can place the ends of the sticks. Print settings: - Infill: 20-25% - Layer Height: 0.2 mm - Line Width: 0.4 mm - Skirt - Support I printed this with support, and it took some effort to remove the supports, but I managed to get them out eventually. Material used: Black PETG https://www.123-3d.nl/123-3D-Filament-zwart-1-75-mm-PETG-1-kg-Jupiter-serie-123-3D-huismerk-i1906-t12191.html Sticks -------- The end of each stick is threaded, allowing you to place the decoration on top. You can choose from four different heights: - 50 mm - 75 mm - 100 mm - 125 mm Print settings: - Infill: 100% - Layer Height: 0.2 mm - Line Width: 0.4 mm - Brim - No Support I printed the sticks with the thread facing the print bed, and since the thread has a 45° angle, no support was needed. Material used: Transparent PETG https://www.123-3d.nl/123-3D-Filament-transparant-1-75-mm-PETG-1-kg-Jupiter-serie-123-3D-huismerk-DFE02000c-i1908-t12194.html Fuzzy Balls ------------- After printing the fuzzy balls, the "hairs" are still stuck together. You can separate them by hand and shape the balls as desired. These can then be screwed onto a stick. Print settings: - Infill: 100% - Layer Height: 0.2 mm - Line Width: 0.4 mm - Brim - No Support I printed this with the threaded hole facing the print bed. Materials used: Transparent colored PETG https://www.123-3d.nl/REAL-filament-oranje-transparant-1-75-mm-PETG-1-kg-i1626-t12197.html https://www.123-3d.nl/3D-filament/Filamenttype/1-75-mm-filament/1-75-mm-PETG/Blauw-p12193.html https://www.123-3d.nl/123-3D-Filament-transparant-rood-1-75-mm-PETG-1-kg-Jupiter-serie-123-3D-huismerk-DFE02002c-i1914-t12195.html https://www.123-3d.nl/REAL-filament-magenta-transparant-1-75-mm-PETG-1-kg-i1999-t12198.html Fuzzy Cylinder ----------------- The fuzzy cylinders don't require any after-work and can also be screwed onto a stick. Print settings: - Infill: 100% - Layer Height: 0.2 mm - Line Width: 0.4 mm - Brim - No Support I printed it with the threaded hole facing the print bed. Star ----- This is a basic star design that can be screwed onto a stick after printing. Print settings: - Infill: 20-25% - Layer Height: 0.2 mm - Line Width: 0.4 mm - Skirt - Support The support for the threaded hole should not be too difficult to remove. Material used: Yellow PETG https://www.123-3d.nl/REAL-filament-geel-1-75-mm-PETG-1-kg-i1468-t12196.html