Hanging Fish Feeder

thingiverse

I strongly prefer not to switch off the return pump while feeding my fish, and I certainly don't want to spend twenty dollars on a piece of plastic. I'm hoping that my design is straightforward enough for you to print without needing any special tools - just print it out and snap it together. I have a Nuvo Fusion 40 AIO tank at home. Please take a look at the video before downloading or printing the part, so you know exactly how they fit together: https://youtu.be/-zVeXLbGpIM ABS is absolutely essential (PLA is completely unacceptable for use with water). Here are the STL files that you'll need: * Fish Feeding Disc x 2 * Fish Feeding Tube (0.3in or less) thick glass x1 OR Fish Feeding Tube (0.3in to 0.4in) thick glass x1 Here are the settings I used in my printer: Printed with: Material: ABS Layer height: 0.22mm Initial Layer Height: 0.22mm Infill percentage: 25% Infill pattern: Grid Printing temperature: 235 Build plate temperature:105 Flow: 96% Retraction Distance: 1.5 mm Retraction Speed: 10 mm/s Print speed: 80 mm/s Travel speed: 80 mm/s Initial Layer print speed: 40 Initial Layer travel speed: 30 Z-hop when retracted: enabled Cooling fan: 40% Support pattern: Grid Support density: 15% Filament Brand: PRILINE