Handy Console frame for WaveShare GamePi20

thingiverse

This device was designed to utilize WaveShre GAMEPI20 as a convenient console. To operate it, you will need the GamePi20 and a Bluetooth mini keyboard. If you have a mobile battery with a diameter of 23 or 22mm, it's recommended that you add it to increase operating time. The GamePi20 already has a built-in lithium battery, so an additional battery is not strictly necessary. If you don't need a cylindrical mobile battery, you can substitute it with a cylindrical part produced by your 3D printer. There are many types of Bluetooth mini keyboards available. I tested the following RiiTek products: Riitek mini Bluetooth Keyboard Rii Slim RT-MW518, Riitek Rii mini Bluetooth keyboard RT-MWK02, and Ewin Mini Bluetooth keyboard+touchPad, or similar models. For assembly instructions, please refer to the photos provided. Requirements: - WaveShare GamePi20 (available at https://www.waveshare.com/gamepi20.htm) - A Bluetooth mini keyboard, such as Riitek mini Bluetooth Keyboard Rii Slim RT-MW518, Riitek Rii mini Bluetooth keyboard RT-MWK02, or Ewin Mini Bluetooth keyboard+touchPad - M2.6, 10mm Bolt&Nut (4 pairs) - A cylindrical shaped mobile battery with a diameter of either 23mm or 22mm. An example is the Anker PowerCore+ mini (available at https://www.ankerjapan.com/category/BATTERY/A1104.html) or similar models. CAD files for this project are available in STEP format: gp20btks33_.stp and gp20btks33L_.stp. STL files can be found in the following formats: gp20btks33_gp, gp20btks33_kb2, gp20btks33_p1, gp20btks33_p2s, gp20btks33_p1_ai, gp20btks33_p2s_ai, gp20btks33L_kb2, gp20btks33L_p1, gp20btks33L_p2s, gp20btks33L_p1_ai, and gp20btks33L_p2s_ai. Update (12/26/2019): Added retaining clip parts to prevent the keyboard and GamePi20 from sliding and shifting. CAD file: gp20btks33_clip02.stp (STEP format). STL files: gp20btks33_clipkb.stl, gp20btks33_clippg.stl.