Handlebar Bag Cradle

prusaprinters

<p>I made this as an alternative to the more expensive handlebar cradles that are out there. I designed it around this bar extender on amazon: <a href="https://www.amazon.com/gp/product/B07FD5DLG9/ref=ppx_yo_dt_b_search_asin_title?tag=thingiverse09-20">https://www.amazon.com/gp/product/B07FD5DLG9/ref=ppx_yo_dt_b_search_asin_title</a>. The only other things you need are a dry bag somewhere around 6 inches in diameter and some velcro straps to hold everything in place. It's been through a couple trips already and held up great! Print with support, 15-20% infill, and preferably using PETG. Other filaments will probably be fine as well though.</p><p><strong>It's dimensions are in inches so in you're slicer you'll have to either switch to inches or size it up by 2540% to match millimeters.</strong> If you're printing in PrusaSlicer, I used the .2mm Quality settings for PETG and just made sure supports were enabled and it came out great. Took about 20 hours to print though!</p>