Handle for Mi Scooter Pro 2

cults3d

This is a simple handle for transporting your electric scooter easly with less effort. WARNING: I designed and tested this handle on my Xiaomi Mi Scooter Pro 2, it might be compatible with other Xiaomi scooters but I've not tested yet. MATERIALS: I used PLA and my scooter was left outside for a couple of months (temperature was between 5° and 20°) without no effect on the handle. Other materials like ABS will be more appropriate for the application of the print. You'll need to print: - 2x Anchor Front - 2x Anchor Back - 1 Handle You might need to tap the screws holes with the screw itself. I prefered a tight fit so it won't wiggle during time. Other parts needed for assembly: - 6x M3 nuts; - 6x 12mm M3 screws. Optional: - Washers for each screw; - Black tape placed on the internal part that secure the handle to the handlebar's stem. This is to prevent the handle from sliding on the stem. In my experience I had no sliding unless I manually pressed the handle up and down since the fit is pretty tight.