Handle for arboron y-carriage V2

thingiverse

<b>Update December 10th, 2018</b> After months of heavy use, the original version finally broke down. It was time for an upgrade, so I decided to give it a fresh new design. You'll find the improved V2 versions of parts A and B in the zip file - enjoy! <b>Update August 18th, 2018</b> The initial approach wasn't yielding the desired results. The handle kept popping off too easily, so I took it upon myself to over-engineer the entire system. Now, it comes in two connected parts held together by a single M3x20 hex bolt and an M3 nut - talk about convenient! There's even a hole for your trusty hex key. To make it work seamlessly, I loosened the screws on parts A and B to create enough space for the claws to latch onto the carriage. Then, I placed the handle over the carriage and tightened the screw. The result was nothing short of perfection. Considering there might not be many with the arboron carriage, I'm thinking of creating a separate version for the original carriage as well - aluminum carriages with similar layouts could also benefit from this design. The old, simple version is still available if you're interested in it.