Handheld housing for rdz_ttgo_sonde with ILI9225 2" TFT display

Handheld housing for rdz_ttgo_sonde with ILI9225 2" TFT display

cults3d

Handheld housing for the rdz_ttgo_sonde decoder based on the project of Hansi, DL9RDZ https://github.com/dl9rdz/rdz_ttgo_sonde. As board I use a T-Beam ESP32 433 MHz LoRa board V1.1, important here is that you take the version with IPEX connector (with antenna cable) and not the model with the fixed SMA connector! The model is designed for the 2" ILI9225 display. The T-Beam board and the display are only fixed with hot glue, but there are also holes for a screw connection. As protection for the display you need a piece of 2 mm plexiglas with the dimensions 39 x 63 mm, which is glued inside the lid. You will also need: 4 M3 threaded inserts 2 M3x6 hexagon socket screws and 2 M3x16 hexagon socket screws to connect the case and the lid. When I designed my case, I put a lot of emphasis on easy printability. I changed the original software according to this tutorial (in German) http://www.p1337.synology.me/dokuwiki/doku.php?id=public:wettersonden

Download Model from cults3d

With this file you will be able to print Handheld housing for rdz_ttgo_sonde with ILI9225 2" TFT display with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Handheld housing for rdz_ttgo_sonde with ILI9225 2" TFT display.