Halo Energy Sword

thingiverse

This is a life-sized (based on my hand measurements) recreation of the Halo Series' Energy Sword. Print Settings Supports: Yes Resolution: Depends On Your Preference For The Slant Sharpness Infill: %20 - %50 Notes: The 3 parts: the handle, the blade hilt, and the blade tip need to be printed separately. Print the handle twice, the blade hilt four times, and the blade tip four times. Adjust the Infill to suit your needs: The Lower The % The Lighter It Is, but It Will Be Not as Strong (Use for a display or model to put on a shelf) The Higher The % The Heavier It Is, but It Will Be Stronger (Use for sword fighting, rough shipping, etc.) Post-Printing These parts will need to be slotted together and glued. The slots may turn out slightly out of measurement, so some filing/cutting may be required. These are here only to help the final creation stay together. Place one handle piece on top of another, both hilt pieces on each side of the blade together, and both blade tip pieces one on another for a strong bond. I strongly recommend piecing together one half then the other then gluing each half together securely.