Half-Life themed Tensegrity Coaster

prusaprinters

I saw GnuElms design an some people on-line mentioned that the struts kind of looked like lamba symbols. So I remixed it to make it Half-Life themed. For most printers with Marlin firmware, you can print this as follows: To print, first slice the logo (without skirt or brim. Just as is), then slice the plate with the logo cutout. Open de gcode of the logo in a text editor and comment out the shut down commands at the end and add an M600 command. (Which pauses and helps you do a filament swap) Then open the gcode of the plate, comment out all the starting gcode, select all and past below the M600 command in the logo gcode file and save. Upload that to your printer and you should be good. The STLs are designed with a layer height of 0.2mm in mind. If you use another layer height this may not work. I've included the gcode I used for my print. This has only been tested on a Prusa i3MK3S with the latest firmware as of today. This is provided in good faith and cannot be held liable if you use it on your printer and something breaks. I recommend you generate your own gcode based on the instructions above and using the gcode as a reference only. To print this, you still need to get the original files from https://www.thingiverse.com/thing:4325186, as I've only included the files I modified. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 60% for struts, 15% everything else Filament: Devil Design PLA Black, Yellow, Bright Orange Category: Decor