Hairy Lion (dual extrusion)

thingiverse

Hairy Lion for dual extrusion. This remix comes from Geoffro's design, Lion HD, which does not require supports. I had a new idea to print lion's mane with flexible filament and the body with standard filament. I think it would look really good and be interesting to touch. My concern was that the wall made of flexible material might not be able to stand and support the mane. So, I split the model into three parts: body, mane, and wall. "Hairy_Lion_dual_flex.AMF" contains all three parts. "Hairy_Lion_dual_flex_part1.stl" contains only main body. "Hairy_Lion_dual_flex_part2.stl" contains only lion's mane. "Hairy_Lion_dual_flex_part3.stl" contains only sacrificial wall. The wall and main body are supposed to be printed with standard filament, while the lion's mane is printed with flexible filament. Old files include: "Hairy_Lion_dual_x.STL" contains both main body and hairy part with sacrificial wall. (Note: the STL file might be problematic if it doesn't fork; try using the AMF file instead.) "Hairy_Lion_dual.AMF" also contains both main body and hairy part with sacrificial wall. "Hairy_Lion_dual_part1.STL" contains only hairy part with sacrificial wall. "Hairy_Lion_dual_part2.STL" contains only main body. The models are crude and not perfect, but I hope they will work well enough. Print Settings: Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Notes: This is only for a 0.2 mm layer height.