H-bot for K8200

thingiverse

Here is the rewritten text. You are going to love my online version of the H-bot. I designed this system to allow you to ride at speeds of up to about 400 mm/sec on the move, with tests performed at 250mm/sec printing rates. https://www.youtube.com/watch?v=IYEHlH3hn0g Instructions Print all parts and replace them with these exact ones. Install the firmware with corexy for k8200/3drag: https://github.com/magu/Marlin Change this setting in firmware: (#define INVERT_X_DIR false) (#define INVERT_Y_DIR true) (#define X_HOME_DIR -1) (#define Y_HOME_DIR -1) Eight printed parts were produced, including 8x bearing_guide.stl parts glued to bearing, 2x support_roulement.stl parts, 2x support_moteur_corexy_2.stl parts, and 2x douille_cale_core_xy.stl parts. An additional part included: eight Bearing 625 2RS 16x5x5 items. Four Pulley t2 2mm or original pulley 2X were used. Two axis rod 50mm x 5mm diameter threaded on both sides for M5 screws and one approximately three-meter length of belt gt2 2mm or the original 3m was included. Multiple screw and nut M5, M6 etc are needed.