Guitar pick construction set

youmagine

The aim of this design is to allow you to select 2 guitar strings at once without any delay. Alternatively, use the opposite side of your guitar pick to pluck one string. The diameter of the guitar pick amounts to 1 mm. When using Cura, you can modify the thickness as follows: 1.) Load the guitar pick into Cura. 2.) Mark the guitar pick. 3.) Select scale (menu on the left). 4.) Turn off uniform scaling. 5.) Change the z-value from 1.0 to 0.8 or 1.2 etc. If you want to add text to your guitar pick, follow these additional steps: 6.) Load one of the available fonts. 7.) Open Preferences --> Configure Cura (menu on top). 8.) Switch off Automatically drop models to the build plate and Ensure models are kept apart. 9.) Mark the text. 10.) Choose Move (menu on the left) and change the z-value to the thickness of the guitar pick, for example 0.8 or 1.2 etc. 11.) Move the text over the guitar pick. If you want to print your text in a different color, stop the print at the height of the guitar pick's thickness, switch filaments, and resume printing. However, this is only possible if you're printing multiple guitar picks with the same thickness simultaneously. If you want to print guitar picks with matching colors for both the guitar pick and text, it is feasible to produce guitar picks with varying thicknesses. Have a great time with your guitar pick construction set.