Guitar Pick and Capo Keeper

prusaprinters

<p>I got tired of constantly knocking my picks off my music stand, so decided to fix it with a 3D print. The keeper will hold 3 picks of varying thicknesses with a minimum of about 0.3mm. Since I sometimes use a capo, I added a keeper for it as well. The whole thing straps onto a music or mic stand using a ninjaflex strap.</p> <p>I added a pad that gets glued into the back of the main body to add some grip, but it's not necessary for me. It adds a little to the aesthetics of the keep (in my opinion) and will make sure whatever you're attaching this to doesn't get scratched.</p> <p>I used a couple of small screws I had in a bin to hold the strap. One side slips into the print and the screw goes through it. The other side uses the same screw as a stud for the holes to slip over. The screws are about 10mm long and 3mm in diameter. I image an M3x8 or M3x10 would work just fine.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Filament:</strong> Techbears/Ninjatech PETG/TPU Black/Gray</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>The strap needs to be printed in a material like Ninjaflex or other soft TPU with some elasticity to it. I printed this on my Ender 3, but it is heavily modified to be able to print this. Well worth the effort though to be able to use filaments like this.</p></div> </p></p> Category: Music