Guitar Effects Pedalboard (build your own)

thingiverse

There are several decent pedalboard designs on Thingiverse - but I wanted the ability to create my own custom-sized board (so it would easily fit in my desk drawer for storage) - so I made this. There's the 'Tube' (which is 2" x 1") - which you can print to any size you want (scale the Z axis up/down in your slicer), and then there are connectors (I connect, L connector, T connector and X connector). For anyone who wants to use the far edge with smaller pedals, I also included connectors with raised portions - so you can add more velcro to it. It's not perfectly flush because I wanted to leave room for imperfections in the printing/etc. You can make this as big or as small as you want. I printed mine with 4 walls and 3 top/bottom solid layers - and it's a very sturdy board. This will sit entirely flat on the ground - so if you want elevations, you'll probably need to remix the L connectors (I may do this in a future update - for now I'm planning on adding rubber feet that should give me enough clearance from the floor). The pictured print was made up of 3x 175mm tubes, 3x 150mm tubes and 4x 65mm tubes (around 700g of filament assuming no mistakes). The connectors used here were 4x L, 4x T, and 1x X (around 500g of filament). If you find this useful, I'd love to see a picture of your pedalboard setup. If you have suggestions for ways I can improve this, drop me a line. Happy shredding!