Guitar Bow

thingiverse

V1 Guitar Bow inspired by Pickaso Guitar Bow Print with normal supports (~75 overhang) Required Prints Bow X1, Shuttle X1, Cap X2 Required parts: Bushing, Bolt, and insert from an old extruder housing is what I used/designed it for, I am sure there are other options. Either a donor violin bow or horse hair (available on Amazon) . High strength super glue. Post Processing: I used a donor bow, before assembling the shuttle into the bow, I glued the shuttle and one of the caps to the bow string while still attached to the old bow. Once dry I cut the bow string off the donor bow, installed the shuttle with the bushing, insert and bolt, strung the string through the hole at the end and glued the second cap making it tight, but loose enough where I could tension it by tightening the bolt. Don't forget to rosin your bow. Feel Free to Remix!!!