guide for filament tevo tarantula

thingiverse

Editing Guide for Filament 1.75mm TEVO Tarantula I. Preparation Before beginning, ensure the filament is properly seated and tightened in the extruder. This will prevent any interruptions during printing. II. Unwinding the Spool To avoid tangling or knotting, unwind the filament from the spool while holding it vertically. Take care not to twist or stretch the filament excessively. III. Cleaning the Nozzle Use a cleaning brush to remove any debris or residue from the nozzle. This will ensure proper flow and prevent clogs during printing. IV. Loading the Filament Gently push the filament through the extruder, making sure it's seated properly. Avoid forcing or pushing too hard, as this may cause damage to the printer or filament. V. Tensioning the Filament Adjust the tension of the filament by tightening or loosening the extruder screws. Aim for a gentle tug on the filament when pulled gently. VI. Final Check Verify that the filament is properly seated and the printer is ready for printing. Perform a test print to ensure proper flow and adhesion.