Guide Anet A6

thingiverse

Printing Flexible Filament on the Anet A6: A Step-by-Step Guide To successfully print flexible filament on your Anet A6, it's essential to follow some key guidelines. First and foremost, ensure that your printer is calibrated correctly. This involves adjusting the temperature settings for both the extruder and the heated bed. Next, load a spool of flexible filament into the printer's frame. Make sure the filament is seated properly in the guide tube and not tangled or twisted. If you encounter any issues during this process, consult your user manual for assistance. Once the filament is loaded, set the temperature to an optimal range (usually between 180°C to 200°C) to achieve a smooth extrusion of flexible material. It's also crucial to set the heated bed to a suitable temperature (around 60°C to 80°C), as this will help prevent warping and ensure that your print adheres well to the surface. Now, select the correct printing profile from your printer's software or control panel. Typically, flexible filament requires lower infill density and higher layer height settings compared to standard PLA or ABS filaments. Experiment with different settings until you achieve optimal results for your specific project. During the printing process, keep an eye on the temperature gauge and adjust it as needed. Flexible filaments can be prone to overheating, which may result in a poor print quality or even damage your printer's components. If you notice any irregularities during printing, pause the job immediately and troubleshoot the issue before resuming. Upon completion of the print, allow it to cool down completely before removing it from the bed. This will prevent any potential warping or deformation due to thermal stress.