Guardians of the Galaxy Infinity Orb crystal

thingiverse

20190401 consolidated all files into a single location. I have integrated a crystal with an LED and implemented a power-saving feature, where the battery only activates when the switch is pressed to prolong its lifespan. This addition will undoubtedly enhance the Guardians of the Galaxy Infinity Orb. To accomplish this, I drilled small holes in one area for the switch and fed the wires through the opening into the orb's interior. I then drilled another hole at the bottom center of one of the inner halves to secure the LED so it protrudes approximately 3/4 inches. For reference, please visit the following Thingiverse links: http://www.thingiverse.com/thing:430184 (orb) http://www.thingiverse.com/thing:1695383 (rings with magnets) The required components include a CR-2032 battery and an LED rated at 3 volts. A momentary switch, type normal off, is also necessary for this project. To print the orb, I used PET clear material. Print Settings: Printer: Da Vinci 1.0A Rafts: No Supports: No Resolution: 0.3mm Infill: 15% Notes: shells are thick.