GTC 580 Touch Screen Controller for the SF50 Vision Jet G3000 in Flightsims

thingiverse

The GTC 580 is the touch controller used in the SF50 vision jet for the G3000 avionics suite. All parts in this project were printed at JLCPCB with resin/SLA and specifically the black resin. This project also contains two files (GTC_580_and_GFC_500_Holder.stl and GFC_500_Placeholder.stl) for an optional desk stand.Bill of MaterialsDisplay1x Waveshare 5.5inch display SKU 23112https://www.waveshare.com/5.5inch-1440x2560-lcd.htm?sku=231121x 180deg Ribbon Cable HDMI Connector (required if you want to use the desk stand)ElectronicsPCBsTo build this project you need to have the following PCBs manufactured (or build them yourself) based upon the provided Gerber files:1x GTC508_PCB_Main_v84_2024-02-16.zipIf you want to only connect one GTC to one Ardunio:1x GTC_580_Single_Unit_Arduino_Shield_v4_2024-02-16.zip If you want to connect multiple GTC unites to one Arduino:1x GTC_580_Arduino_Shield_v17_2024-02-16.zipComponents1x EC11EBB24C03 Dual shaft rotary encoder1x EC11E15244G1 Encoder3x Omron B3F-4055 Switches2x 2.54mm Pin headers 2x6 (12 pins total) 1x 2x6 / 12 Pin 2.54mm Ribbon Cable Arduino1x Arduino MEGA2560 PRO with male pin headers soldered onto the front / top side. 3d PrintsThe following 3d parts need to be printed:1x Front_Bezel.stl1x Display_Bracket_Right.stl 1x Display_Bracket_Left.stl 1x Bottom_Knob.stl3x Button_Middle.stl1x Top_InnerKnob-_Simple.stl1x Top_OuterKnob-_Simple.stlThe following parts are optional if you want to also build the desk stand:1x GTC_580_and_GFC_500_Holder.stl 1x GFC_500_Placeholder.stlHardwareM3 (DIN7991 or compatible) screws in black with 8mm, 10mm and 12mm lenghts13x Ruthex M3x5.7 heat set insertsSoftwareMobiflight Connectorhttps://github.com/MobiFlight/MobiFlight-ConnectorPopout panel managerhttps://github.com/hawkeye-stan/msfs-popout-panel-manager