GTA V Launch Button

thingiverse

You will need:Raspberry Pi Pico1 regular buttonSome wireOptionally 1 or 2 red LEDsOptionally 1 or 2 blue LEDsOptionally 4 75Ω-220Ω resistorsRaspberryConnect Raspberry Pi Pico to your computer while holding down the little white Bootsel button on the PiA folder should open. Copy the adafruit-circuitpython-raspberry_pi_pico-en_US-8.2.9.uf2 to that folder.The window should close and reopen with new stuff inside.The name of the now opened folder is CIRCUITPYRemove the code.py you see in the CIRCUITPY folderCopy the code.py (with leds) or code.py (original) to the CIRCUITPY folderRename the newly copied file to exactly code.py without anything in the endCopy boot.py to the CIRCUITPY folderOpen the lib folder in CIRCUITPY folderCopy the adafruit_hid folder to the lib folderPhysical connectionsIf you use code.py (Original):Solder one of the button contacts to GP18 and a second one on the same side of the button to GNDIf you use code.py (with 2 LEDs):Solder one of the button contacts to GP18 and a second one on the same side of the button to GNDSolder the shorter pin of each LED to GND pins of the Pi (use some wire to reach if necessary)Solder the resistor to the longer pin of each LEDSolder the other end of the resistor of the blue LED to GP20 (use some wire to reach if necessary)Solder the other end of the resistor of the red LED to GP19 (use some wire to reach if necessary)If you use code.py (with 4 LEDs):Solder one of the button contacts to GP18 and a second one on the same side of the button to GNDSolder the shorter pin of each LED to GND pins of the Pi (use some wire to reach if necessary)Solder the resistor to the longer pin of each LEDSolder the other end of the resistor of a blue LED to GP20 (use some wire to reach if necessary)Solder the other end of the resistor of a red LED to GP19 (use some wire to reach if necessary)Solder the other end of the resistor of a blue LED to GP21 (use some wire to reach if necessary)Solder the other end of the resistor of a red LED to GP22 (use some wire to reach if necessary)Launch GTA V Button.exe and press the button. Enjoy! :)NB! If you want to access the Raspberry after you put the boot.py to the root folder, connect GP2 to GND