gt2-50t

thingiverse

Customized Version of Thingiverse Design: Chainwheel Created with Customizer, Powered by Thingiverse Instructions for Fabrication Utilizing the Following Parameters: m3_dia - Motor Mount Diameter Set at 3.2 m3_nut_depth - M3 Nut Depth Defined as 2.7 retainer_ht - Retainer Height Specified at 1.5 motor_shaft - Motor Shaft Length Fixed at 8.2 nut_shaft_distance - Distance from Nut to Motor Mount Set to 1.2 profile - Chain Profile Established at 12 pulley_b_dia - Pully Bearing Diameter Stated as 20 m3_nut_flats - M3 Nut Flats Depth Recorded as 5.7 teeth - Tooth Count Determined to be 150 m3_nut_hex - Number of M3 Hex Flats Specified at 1 additional_tooth_depth - Additional Tooth Depth Configured as 0 idler_ht - Idler Bearing Height Set at 1.5 pulley_b_ht - Pulley Bearing Thickness Fixed at 0 pulley_t_ht - Tensioner Pulley Height Defined at 12 idler - No-Idler Setting Indicated at 0 nut_angle - Angle of Nut Attachment Stated as 90 Degrees no_of_nuts - Number of Nuts on the Chainwheel Configured to 0 additional_tooth_width - Additional Tooth Width Established at 0.2