GT1P FTIP Mouse Mod with Sidebuttons

thingiverse

I'am proud to present my own fingertip GT1P shell creation for Logitech G Pro X Superlight 1 and 2 internals.GT1P by ㄷㅇㅇㄴㅆㅇㅁㄹ Thanks to tyuhn and ii999 for the inspirations.The clicks you can print with flat round holes or without. In the holes will fit some PTFE skates. I use ICEv2 (2nd smallest 6mm) with 0.85mm height e.g.If u use the clickz without PTFE dot u should consider sanding the click area where it touches the switch and use some alutape / mylar tape e.g.Left hander version will be available soon. Also working on a Razer v2pro internals version.Stay tuned & please follow me here & on x please: coolm0dzInstructions:Print in PLA with support where needed. Best use 0.20 or 0.18 layer height. 15% infill for best sturdiness. 5% for best weight.Lube the slide in plugs of the main clicks with lubricant so they slide in easier. I use Synco Lube from Super Lube. If it is too complicated to slide the buttons in/out just widen the slide in a bit with a flat screwdriver or use a thin nail file. You can also push out the clicks with a thin 0.8mm flat object or thin nail file from the bottom. https://twitter.com/i/status/1728850591361995154Place the battery in the back and a little bit to the RMB side to make the weight distribution bestDo not screw the screws too tight. It can damage the shell or make the base warp.Version printed in PLA with Prusa i3 MK3S+ & BROZZL nozzle Ruby for E3D V6 0.4mm. If you want to get it more weight reduced use ABS. -25-30% weight.Overall if slide in of your party are to tight use sandpaper or nail file to reduce the end thickness a bit.Be aware that it is a free mod. I am not responsible for any damage or harm you do to yourself or your parts ;)