GT Helion Rear Wheel Truing Gauge
thingiverse
I created this so I could tighten the wheels on my Helion while riding a bike. To do that, I'll need to drill two holes for an M4 thread and open one hole for a pass-through M4 opening. I used two M4 x 30mm Nylon screws - one of which I sharpened slightly at the point. Additionally, I added some rubber tape inside the clamp area to prevent scratching my frame and keep everything in place. Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: No Supports: No Resolution: 0.3 with a 0.4 nozzle Infill: 100% Notes: I printed this at 100% infill using BamTack PLA on my large Kossel at 190c for the hotend and 75c for the hotbed. Post-Printing To assemble this, I'll need to drill two holes for an M4 thread and open one hole for a pass-through M4 opening. Next, add some rubber tape or duct tape inside for padding. How I Designed This I designed this using Google SketchUp.
With this file you will be able to print GT Helion Rear Wheel Truing Gauge with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on GT Helion Rear Wheel Truing Gauge.