Gryphon battery foregrip

thingiverse

This is a foregrip for the Gryphon by Flygonial that can store your LiPo. Also included is a removable stock that has some sling points. the carbine barrel is a requirement to use this foregrip: https://www.thingiverse.com/thing:4139847 The foregrip bolts into the carbine barrel via the 4 bolt holes meant to be used for the side mounted picatinny rails. Make sure to print the motor cover (bottom of the flywheel cage) to get a little extra room in the foregrip for your LiPo as well as a hole to run your wiring. The foregrip itself has mounting holes for the side mounted picatinny rails found in the carbine barrel files. The stock attachment point required a small spring (a nerf catch spring or a mechanical pen spring works for this). Use 2 M3x8mm bolts to secure the door to the attachment point. The shoulder stock uses some 3/16" metal rods. Cut to your rods to desired length (~9 inches is probably the average length most people would want). Next, use tape to temporarily hold the 2 rods together. This will help you cut grooves in both rods simultaneous and ensure the spacing is the same on both rods. Use a small round file to file grooves 1.5" from one end of the rods and .5" from the other end of the rods. The depth of the grooves should be ~1/3 of the way through the rod. Once that is done line up the slots in your bars with the bolt holes in "stock_attachementHook.stl" and "stock_buttPlate.stl". Insert some M3x12mm bolts into the holes and your prints will be firmly secured to the bars. The space in the foregrip is large enough to fit my 1300mah 3s LiPo. Please refer to the image for the approximate size of the space. Thingiverse won't let me link this remix properly. These are parts remixed from : https://www.thingiverse.com/thing:4139847 butt pad remixed from: https://www.thingiverse.com/thing:3603833 Edit February 9: Foregrip.stl was missing a front mounting hole for the decorative knob.