GRS Arcade Steering Wheel ALU 1.1 Adapter Kit

thingiverse

The GRS Arcade Steering Wheel ALU 1.1 Adapter was designed to allow using the GRS (Glen's Retro Show) Arcade Steering Wheel with the AtGames Legends Ultimate v1.1. These models will utilize existing components from the ALU and GRS Steering wheel to allow playing racing games on the Legends Ultimate. *NOTE: If you don't own a 3D Printer, check with your local library. Many do have 3D printers and services to allow printing this kit at little or even no charge. Print time for the GRS_ALU11_FullSet.stl (only one you really need) is about 3 hours 11 min. at 100% infill. I used PLA (plastic) for printing. Basic Assembly: * Remove the spinner top on the ALU v1.1. * Place the metal insert from the GRS Wheel inside the wheelBase.stl * Using the small screws and allen wrench, tighten the metal insert over the notch of the ALU spinner. You can also place the resistorRing.stl between the wheelBase and the control deck if you wish to add additional resistance. * Attach the wheelShaft to the GRS Steering Wheel assembly and tighten the two small screws using the allen wrench. * Slide the GRS Steering Wheel assembly + wheelShaft into the provided slots on the wheel base. * Start up a racing game and have fun! Included in this archive is the GRS_ALU11_Source.zip which contains the source files for everything shown here. This is provided to allow easy modding/remixing should anyone wish to enhance or remix these adapters.