Gridfinity Big/Small Parts Tray W/ Removable 1x1 Screw Bin & Stackable Lid

prusaprinters

UPDATE: I have created screw bin holders in 2x2 grid sizes for plates and other bigger parts as per my field research data. I’ve also created 1x1 lids for the screw bins! The big parts tray has 3 xrta small slots, 2 small slots, one medium slot, and one big slot.  You can insert the small parts bin into the corner of the big parts tray, or you can add your favorite Gridfinity printable!  The lids i made are big enough to put on a small parts bin and stack another on top so the magnets won't pick up the screws inside the bin underneath.  I also designed 2 different size trays, one small one that will print with one wall using a .4 nozzle, and one that is thick enough for 2 walls for each divider in the tray.  I figured I would print the thing I use the most.  I work in an electronics repair shop and we always need something to keep the small screws with the device, so why not keep them in the grid!I made a 9 compartment 1x1 size grid with an 11mm wall.  This won't hold all the screws you own, but it will hold all the screws in your phone… trust me…. I tried.I made one with a bigger hole for the “plates” some phones have and I made sure to stick to the gridfinity standard and made them STACKABLE.  I may add ones without magnet holes in them if you want some for easier stacking.  Further field testing research data is needed to determine if they are needed..