Grid for Video Light SmallRig RM75

prusaprinters

A grid for the video light SmallRig RM75. It includes metal washers that will attach to the RM75’s magnets to hold it in place. The top controls of the RM75 remain fully accessible. Also, the thread on the bottom side remains accessible. The bottom side wall is thinner, so it is possible to still attach the RM75 to an adapter plate or tripod. The thread can also be used to fix it in place if the magnetic force is too low for your application or if you want to print it without the washers. In assembled condition, there is a gap of about 1mm between the grid and the diffusor of the RM75, so you can add a diffusor plate for a softer light if needed.Printing Instruction:Recommended Material: Matte Black PLAWashers: 4x DIN9021 M5 or similar (outer dia: 15mm, thickness 1,2mm)Print with the grid pointing downwards with no supports. Add a pause in your slicer software at the top layer of the slots for the washers so that you can put them in manually. The washers have slight free play when in place. If you want to fix them entirely, you can put a small drop of glue on the edge of the washer just when putting them in. Enjoy!