Green Lantern Mod for Oil Lamp

thingiverse

I was asked if I could create a green lantern mod for the oil lamp to go along with the Batman one. https://www.thingiverse.com/thing:4118365 - oil lamp https://www.thingiverse.com/thing:4128518 - batman This mod is slightly more complex than the Batman version and has multiple ways of printing, depending on whether you are modifying the original or printing it as a fixed version. If you look at the models, they are fairly easy to understand, but I have tried to explain below. For the green tint, I used some green plastic flexible sheeting, similar in thickness to acetate. I acquired this material somehow, and there are actually colored acetate sheets available on eBay, so these should work fine. A single A4 sheet or similar is all you need. I glued the front on top of this and then glued the underplate on the back to add strength. An additional difference from the Batman version is that it includes an extra cover for the windows, allowing a green tint to be added. Parts are split into two types, just like the Batman mod, permanently fixed and removable. The pictures show the removable version that can be added to this. This is then broken down into two more types: with the center connected via thin beads to the outer body or separate. I did separate and then glued the center onto the transparent film I was using. Both: * Window_cover - optional, would need 2 - cover the windows so you can add a tint, if building as one then the tint can be put on the original window instead * underplate.stl - optional, a plate for underneath the model to make thin material more rigid if gluing Removable * handle.stl -handle for attaching to the plates - optional, would need 2 * plate_2part.stl - center separate has handle mounts * plate_2part_no_handles.stl - center separate * plate_connectors.stl - center joined to body * plate_connectors_nohandles.stl - center joined to body - no handles Fixed: * full_cover_2part.stl - center separate and need to be glued onto film/window * full_cover_connected.stl - center joined If you have questions, please ask. These instructions are probably not the best guide, but models are fairly simple to understand.