GRAVITRAX Stone with triple small corners and height stone with pass throughs

prusaprinters

<p><strong>GRAVITRAX</strong>; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too. Is that Column in the way too? Let’s pass through it then.</p><p>Just print your own!</p><p><strong>GRAVITRAX</strong> Stone with triple small corners and height stone with pass throughs on top h=25 mm. It has a tunnel through which ball can pass.</p><p>Print includes two parts: Column and Footplate; Footplate clicks in the bottom of the stone.</p><p>You do need some force to click it in, that is intended that way (use other height stone to tap footplate in place). Tested, fitted and used with my own Gravitrax set</p><p>More to come, if you like it and you are rich enough then <a href="https://www.paypal.com/paypalme/nigeke1962"><strong>Paypal Me</strong></a>, else just enjoy!</p><p><strong>G-code details:</strong></p><ul><li><strong>Printer: Prusa MK3/S/S+</strong></li><li>Material: PLA (1.75mm); 30 gr.; 10.05 m</li><li>Print settings:<ul><li>Nozzle 0.4 mm</li><li>Extruder 210 C°</li><li>Heated bed 60&nbsp;C°</li><li>Layer 0.15 mm</li><li>Infill: Grid 15%</li><li>Adhesion: Skirt</li></ul></li><li>Print time (est.): 3 hr. 40 min.</li><li>Software: Cura v.4.12.0</li><li>Stl file: exported from dwg</li></ul><p><strong>Note:</strong></p><p>The first prototype didn’t go to well as the tiny pillars at the centre of the corner are very small for printing. As you can see, I added some fins to solve this problem. However the failed printed stone was very usable and I cleaned it up. Why I left it in the pictures is by accident the Prusa MK3/S/S+ printed an overhang that should not be possible. Just have a look at that.</p><p>This printer keeps amazing me!</p>