Graphics Card (GPU) Stand/Holder for Display

prusaprinters

<h3>GPU display stand purely for display purposes, to display your old gpu on a nice stand.</h3> <p>Made some changes to the original, no supports needed, made the bracket easier to print and a lot stronger, also made it printable on printers with a smaller print bed. The parts are friction fitted together.</p> <p><strong>Parts:</strong></p> <ol> <li>GPU_display_stand_base</li> </ol> <p>The base of the stand. 30% infill. 2. GPU_display_stand_bracket_pillar</p> <p>Vertical pillars for the bracket, 2 of this is needed. Might need to sand the ends down a little depending on your print tolerances. 80% infill. 3. GPU_display_stand_bracket_cap</p> <p>The top of the bracket, use 2 M3 screws to screw your gpu to the stand. 30% infill. 4. GPU_display_stand_support</p> <p>Optional support for bigger gpu's (although you'll probably need it for 3 slot cards), makes it more stable and prevents sagging. I used 80% infill for the overhang parts and 30% for the rest. If you can't set infill for specific regions, 60% infill.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>See above</p></div> <p><strong>Filament:</strong> Generic PLA Any</p> </p></p></p> Category: Computer