Gramazon 3rd Gen V2 - Amazon Echo Dot 3 Amplifier

cults3d

/!\ UPDATED 09/2021 /!\ Addition of optional rings GG3_V2_Optional_Joint_1.stl -> need for supports GG3_V2_Optional_Joint_2.stl -> need for supports GG3_V2_Optional_Joint_3.stl -> need for supports GG3_V2_Optional_Joints.stl (3 in 1) -> need for supports /!\ NEW VERSION 2020 /!\ First of all I invite you to go and see the IamStarGoat thing if you haven't already done so, to have the details of the original project: https://www.thingiverse.com/thing:2818405 This version has been completely redesigned for echo dot version 3. Files are already oriented for better printing without supports (except for GG3_V2_Joint) To mount: turn the GG3_V2_Chamber_Inside over and paste it into the GG3_V2_Chamber_Notch File to print for the base : GG3_V2_Chamber_Notch.stl -> no brackets, needs to be turned 45° to fit on a 20cm tray GG3_V2_Chamber_Inside.stl -> no supports GG3_V2_Chamber_Lid.stl -> no supports GG3_V2_Holeplug.stl -> no supports File to print for the neck and horn: GG3_V2_Neck_01.stl -> no supports GG3_V2_Neck_02.stl -> no supports GG3_V2_Neck_03.stl -> no supports GG3_V2_Neck_04.stl -> no supports GG3_V2_Horn.stl -> no supports File to print for the joint: GG3_V2_Joint.stl -> need for supports All parts of the neck, horn and joint should be glued together. For the base, only GG3_V2_Chamber_Inside can eventually be glued into GG3_V2_Chamber_Notch. Alexa Tip: In the mobile app, turn down the bass and turn up the treble as much as possible for the best sound. Follow me for the latest news, see my creations :)