GPS Support for KTM 790 Adventure

thingiverse

WARNING The tabs holding the part to the bike are weak. One print failed in this area, both tabs snapped. It may have been a print fluke, but to be safe: * Always use a tether on your GPS (to the windshield for example) to prevent losing your GPS. * There is a redesigned part using inserts that is more robust, please print this one instead: https://www.thingiverse.com/thing:3719560 This is a wedge to replace the part marked "Remove for GPS mount" on a KTM 790 Adventure. 1) Remove the original part (2 screws). 2) From this original part, remove the two metallic captive nuts that the screws go into. 3) Place the new piece in position. 4) Mark and drill two holes in the tabs (I drilled them in place to ensure perfect alignment). 5) Remove the new part from the bike, put the two captive nuts on the tabs. 6) Bolt whatever you want onto the new part. 7) Install on the bike. Enjoy your GPS. The spacing on the holes follows the AMPS standard, most GPS mounts will bolt directly onto this. The nut holes are planned for 3mm bolts.