GPS holder replaces clock NA1 NA2 (Nav Pod)

thingiverse

This mount bolts in to replace the stock digital clock with a 7” Garmin Nav unit. The GPS can display the time in the bottom corner, or the exterior temperature, or both, or a myriad of other configurable things… Garmin DriveSmart65 has a 7” screen. (It links to your phone using Bluetooth to provide outdoor temperature, traffic, and weather data, and more. It has the stiffer ~46 mm disk fitting, as opposed to the 17 mm ball fitting.) The Garmin unit can be easily detached to take to other vehicles or for theft prevention. Power: The Garmin power supply usually plugs into the cigarette lighter. For a cleaner appearance, use the clock power supply into the back of the mount with a 12V=>USB power supply and a mini-USB cable. Use pins 1 & 4 for ignition-on operation. The plug then clips into the connector hole in the back of the mount assembly to avoid rattling. The mount has a hollow section to contain the electronics with a port to the front for the GPS power and a port in the back to hold the clock power supply connector. The slide-in cover for the hollow section has venting the logo. The screw is a 1/2” #4. Backup Camera: The system can also be used for Back-up Camera operation. The Garmin BC40 camera requires no holes or additional wiring. See here for a holder that’s much more aesthetically pleasing on the NSX than the chrome one included with the camera. https://www.thingiverse.com/thing:4854107 Enforcement Radar and Weather Radar: The DriveSmart65 can warn you of speed camera locations if you have that enabled.