GOTHIC LANTERN WITH LED LIGHT AND CHAIN

thingiverse

I designed a complete lamp by adding a new base and LED light component, connected directly to 220Vac without a transformer. Rotate the piece before printing it. The LEDs light has a small power supply board and four LEDs boards. The power supply board consists of only six components. The LEDs board features four LEDs and two jumpers, all mounted on one copper side. You will need four LEDs boards, each connected in serial mode to achieve 16 LEDs in series. I've included the schematic and boards so you can build your complete lamp. **Important:** The new part called BASE_BASE_CAM at 80%.STL is scaled down to 80% compared to other files. You must scale all other files to 80%, except this one, which is already scaled. The power supply board will fit perfectly on it. Scaling the other parts to 80% will ensure they fit within a 200x200mm bed size. Remember not to scale BASE_BASE_CAM at 80%.STL, as it's already been scaled down. BASE_BASE_CAM at 80%.STL will be joined to the lamp using three small screws. Enjoy your complete lamp!