Gorilla Sand/Soft Soil Ground Stake

prusaprinters

<p>280mm long monster sand/soft soil ground pegs for tents, awnings, gazebos or whatever requires pegs to secure to sand or soft soil.</p><p>As with any plastic type pegs, to be driven into the ground with a rubber mallet only.</p><p>Printing recommendations;</p><p>Minimum 6 perimeters, 20% Grid infill and 6 top and bottom layers. PETG, ABS or ASA.</p><p>I haven't tried PLA but I cannot see why it wouldn't work as well so long as you print with the printing recommendations outlined above.</p><p>No supports required, file is in the correct orientation for printing. Can be scaled up or down to suit the maximum diagonal size of your build plate.</p><p>Happy printing.</p>