GoPro mount to tiny tripod ecosystem

prusaprinters

<p>This part is to connect an action cam with the GoPro-typical mounting connector to the tiny tripod ecosystem that I have published a while ago:</p> <p><a href="https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio">https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio</a></p> <p>For good print quality, I have uploaded this part as two pieces which must printed separately (standing upright) and need to be glued together.</p> <p>This has the positive side effect that you can directly re-use the GoPro mount piece for your re-mixes. I have printed this part both on a Prusa i3 Mk3S as well as on a Prusa Mini, both with very good results.</p> <p>All you need in addition is a M5 nut, which you may want to glue in, to not loose it. It is held in a somewhat tight fit in the part, so it will not immediately fall out, even if you don't glue it in.</p> <p>Use this part on your own risk, it's totally your thing if you loose or damage your camera. Take special care to use a glue that you know to work well for the material that you use. I have printed mine in PETG from DasFilament.de, which for me glues extremely well with Yuki Model superglue. Please note that I have found that PETG from different suppliers reacts significantly differently to certain glue types and manufacturers.</p> <h3>Print instructions</h3><p>I propose to print these parts in PETG, both with the square flat side on the print bed. No brim or supports was needed for me.</p>