GoPro FPV Pan Tilt fits Hero 3 or 4 and seperate FPV camera
thingiverse
This is my pan/tilt designed around the GoPro Hero 4 Black, which should also fit the 4 Silver or the Hero 3 cameras. It features a mounting pad on top for a stand-alone FPV camera with holes matching the mounting pattern for full-size cameras like the Swift/HS1177 style and micro cameras such as the one I have pictured. The GoPro slides into the back of the mount and is held in place by a velcro strap that fits around the lens, available online for about a dollar. It was designed to fit an Emax ES08MA or MD servo for tilt and uses a GWS S125-1T servo for 360-degree pan. It simply bolts onto a servo wheel, which is then attached to the pan servo. The tilt axis screws are M3 size with a tapered head, allowing them to be adjusted where they just start making contact with the base to center things up and eliminate all slop while remaining smooth with minimal friction. There are shallow recesses for the buttons to slide into, preventing them from being pressed or scraped when sliding the camera in and out of the mount. Here are some links to the velcro strap and Dubro pushrod I used: Strap - http://www.valuehobby.com/gopro-strap.html Kwik Link - https://www.dubro.com/products/kwik-link-with-rod?variant=27880505607 I recommend making the z-bend using z-bend pliers to keep it tight and square, as there's not a lot of extra room around the pushrod when it drops down into the cutout while tilting the camera up. Make the rod so it can be adjusted where the holes at either end are about 35mm apart center to center. Subscribe to my YouTube channel for FPV-related content! https://www.youtube.com/user/bonafidepirate https://www.youtube.com/watch?v=UBfs7woQL9w You can help me by using the affiliate links below when making a purchase: Banggood - http://bit.ly/2s7BK1c eBay - http://ebay.to/2r7k3mb Amazon - https://www.amazon.com/shop/bonafidepirate Foxeer - http://www.foxeer.com/?u=499 Gearbest Affiliate Link: https://www.gearbest.com/remote-control-toys-c_12018/?lkid=11610439
With this file you will be able to print GoPro FPV Pan Tilt fits Hero 3 or 4 and seperate FPV camera with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on GoPro FPV Pan Tilt fits Hero 3 or 4 and seperate FPV camera.