GoPro crane for a IRWIN "QUICK-GRIP" Clamp

prusaprinters

<p>this is my go-to camera mount for the workshop and also out and about. it uses an Irwin QUICK-GRIP Bar clamp with a 13mm x 5mm bar, to attach your GoPro on a shelf or table or just about anywhere.&nbsp;</p><p>This consists of 3 parts, no support should really be needed, but you may find some tiny supports on the recesses for the screw heads might be good when printing the Bridle.</p><p>&nbsp;The crane Print needs to be paused at 4mm z Height to insert an M3 steel nut, and this is screwed to the body with an M3 x 8mm socket head cap screw. a M5 Nut and GoPro screw are used to attach the camera to this too.</p><p>The Body and the Bridle clamp around the Bar of the Clamp, with the holes in these parts located on the pressed-in roll pin. these are fastened by M3 x 20 Socket head bolts and nuts.</p><p><i>UPDATED 1/6/22 &nbsp;</i></p><p>New model for a slightly tighter fit on the clamp bar added</p><p>---------------</p><p>you will need :</p><p>the three basic prints, (i used PLA, .15mm quality, 15% infill.&nbsp;</p><p>1x M3 stainless or steel Nut</p><p>1X M3 x 8 socket head cap screw</p><p>2x M4 x 20 socket head cap screws</p><p>2 x M4 nylon locknuts (nylon optional)</p><p>an M5 Dome nut or standard nut</p><p>and a GoPro locking screw.</p><p>Also Allen keys to suit.&nbsp;</p><p>Link to a video showwing assembly here.&nbsp;</p><figure class="media"><oembed url="https://youtu.be/kUBVJwFVROY"></oembed></figure><p>&nbsp;</p>