GoPro boom mount

thingiverse

This is a customized version of the "GoPro Camera Mount" available on Thingiverse (http://www.thingiverse.com/thing:62800). It was created using the Customizer app on the same website. To recreate this specific design, follow these instructions: - Set the gopro_captive_rod_angle to 45 degrees - Choose a clamp as the gopro_secondary_what - Set the gopro_captive_protruding_h to 0.5 - The gopro_bar_screw_shoulder_th should be 4.5 - Do not rotate the gopro_secondary (set gopro_secondary_rotated to 0) - Use an extension rod with a thickness of 3 for gopro_ext_th - The gopro_ext_len is set at 50 - The gopro_bar_rod_d is 37mm - The camera mount is designed for triple setup (gopro_primary = 'triple') - The captive rod has an inner diameter of 3.8 (gopro_captive_rod_id = 3.8) - The gopro_bar_screw_head_d is 6.2mm - The rod nut's outer diameter is 8.05 (gopro_rod_nut_od = 8.05) - The gopro_bar_th is 4mm thick - There will be a 3mm gap between the bars (gopro_bar_gap = 3) - The gopro_bar_screw_d is 3mm - The gopro_rod_nut_th is 3.6