Googly Polypanels

myminifactory

Make Anything's polypanels now come equipped with Make Anything's googly eyes - or at least googly pupils. This provides the inner part of a standard square polypanel, to be used with googly pupils from 1-inch googly eyes (the 1.5-inch ones are a bit too large). It can also be paired with the polypanel edge from the square polypanels. I've included these in the download for your convenience, or you can get the originals from https://www.myminifactory.com/object/3d-print-polypanels-square-89425 and https://www.myminifactory.com/object/3d-print-googly-eyes-1-inch-93764. The inner panel is 2 mm thick for use with an edge-only panel. Alternative inlay panels are 1.2 mm thick, fitting into a standard solid or open panel (standard square for the eyes and half-size square for the teeth). Note that the tabs holding the pupil part are about 0.6 mm thick. Be careful when removing the print from the build plate as it may break. I printed my panels with 0.15 mm layer height, but it probably works well with 0.2 mm too. For more on polypanels, see makeanything.design/polypanels.