Google Pixel 3 XL - Lite Case

prusaprinters

<p>I recently broke the glass on the back of my Google Pixel 3 XL.<br/> I didn't like any of the 3d printed cases, as I found them too bulky for my liking.</p> <p>So I designed my own.</p> <p>This case is designed to cover most of the back of the phone (covering up all of the cracked glass I have), but it tries to expose as much of the original rounded edges as possible in order not to mess with the overall feel of the phone.</p> <p>This "case" was designed to be printed in PLA, as it "clips" to the back of the phone. You might be able to print it in ABS or PETG, however, I haven't tried those materials. TPU will not likely work as I don't think the case would stay on the phone.</p> <h3>Print instructions</h3><p>I would recommend using 0.2mm layers, as there is a sacrificial layer built into the model, which means that this design is support free.</p> <p>If you want to print at a different layer height (some of the fillets would likely feel a little bit better), you are more than welcome to download the fusion 360 source file and modify it yourself :)</p>