Google Nest Audio Wall Mount

prusaprinters

<p>Howdy,</p> <p>This is my wall mount for a Google Nest Audio. I wanted to put it in the outside entertainment area away from the elements.</p> <p>It's simple enough and secures the speaker really well. The ring is a snug fit but isn't at all difficult to take the speaker in and out, just support it with your hands when doing so as to not snap it off. You could likely print at 101% scaling to make it less snug, but I didn't need to.</p> <p>The one I printed didn't have the power cable hole and channel on the back for easy routing, as soon as I went to mount it I realised it needed it, so I added it but that bit is untested, although I cant imagine why it wouldn't work.</p> <p>The google text is tacky but just there to remove material and is hidden by the speaker.</p> <p>I printed it in eSun PLA+, 0.28 layer height (doesn't need to look pretty for me, its functional), 45% infill for strength and a brim to stop warping. I printed it with the Google text on the print bed and supports for the ring.</p> <p>Hope it helps someone!</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.28mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>45%</p></div> <p><strong>Filament:</strong> eSun PLA+ white</p> </p></p></p> Category: Audio