GOLF SET 3D print model

cgtrader

A Set to Put Your Skills to the Test or Simply Chill This collection features a rod clamp to be secured on a 20mm diameter shaft, a sphere (43 in diameter) and a cavity designed for installation. Follow the link: https://twitter.com/fabricejeanpier 3D Printing Parameters Extruder Temperature: 200°C and Platform Heat: 55°C Layer Thickness: 0.2/ 0.3 millimeters Wall Building Mode, Outline Layers: Three (3) Bottom Layer Building Mode, Solid Surface: Three (3) on top, Three (3) at the bottom Fill Density: Twenty Percent The set includes a metal clip to be mounted onto a rod of 20mm in diameter, a ball with a diameter of forty-three units, and an indentation meant for positioning. Please see: https://twitter.com/fabricejeanpier For settings pertaining to 3D printing the provided item: Extruder heat: two hundred degrees Celsius; surface temperature: fifty-five degrees. Height between each print layer: two-tenths to three tenths millimeters. Print layers in a stacked manner, using the perimeter model: 3 perimeters built for stability, thickness and quality. For a horizontal base (flat) layer: solid at the top; solid on the bottom for foundation, three times total. Twenty percent filling, the remaining eighty will be hollow air space inside each item. You need to have supports in place when you're printing the ball part. For print speeds during outlines perimeter speed should be 30 millimeters per second.