Goa'uld Desk Lamp

prusaprinters

<p>You might remember the (Stargate) Goa'uld mother-ship design... :)</p> <p>A quick test model provided for printer setup.<br/> It includes the "worst" geometry to be printed in the main models and could save you same time and filament :)</p> <h3>Print instructions</h3><h3>Category: Decor Summary</h3> <p>You might remember the (Stargate) Goa'uld mother-ship design... :)</p> <p>A quick test model provided for printer setup.<br/> It includes the "worst" geometry to be printed in the main models and could save you same time and filament :)</p> <h3> Print Settings</h3> <p><strong>Printer:</strong> ANYCUBIC I3 MEGA</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0,2</p> <p><strong>Infill:</strong> 20</p> <p><strong>Filament:</strong> Noname PLA <br/> <strong>Notes:</strong></p> <p>Problems with the test model? - increase in slicer the Z for the main models (ship + base) up to the maximum allowed for your printer (scale only on Z). Apply the same scale to the test model (only on Z, of course), increase the extrusion width up to 0,75mm-0,8mm / 0,15mm-0.2mm layer height, use PLA at low temperature (185C), cooling 100% and re-test.</p>