
Go Pro connector style Camera Mount for Enclosure Frame
prusaprinters
I created this model to fit my Logitech camera but I designed it to utilize my go pro accessories mount that had the thread to screw to the bottom of my Logitech web cam. any 2 pronged accessory mount from my go pro kit will fit in to this mount so you can use your mounting systems from go pro pretty easily on this.This mount attaches to the frame tube of my Comgrow Enclosure. The Tubing is 17mm but the mounting back plate and front plate has some wiggle room to go bigger or smaller by a few mm id say 14-20mm. I recommend supports on the curved faces only using prusa slicers paint on supports surface mode. I also wanted the threads to be super secure so I created modifiers in my slicer to make the bolts and the female threads and also the connection to the go pro mount at 100% infill. the rest of the model was at 15% infill.2 layer heightpla15 infill (except the threaded areas) after printing, i ran the bolts through the threads of the back plate working back and forth to clean up any residual strings. they were created with a tolerance so should work flawlessly after the initial cleaning just described.Note, you will need the gopro style handle screw and nut to attach to this printed mount.Created in Fusion 360
With this file you will be able to print Go Pro connector style Camera Mount for Enclosure Frame with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Go Pro connector style Camera Mount for Enclosure Frame.