Go Pro camera holder for attaching to standard pole extender

prusaprinters

I needed a way to inspect my gutters in the spring since the will fill up several times with leaves and maple tree seeds. I have a 20 foot extension pole, and this is perfect! turn on gopro wifi, and check it on your phone from the ground, No more dragging the ladder around and setting up.This is a remix of GoPro Pole Mount by bmoren with a threaded bolt made using the openScad script from NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory by mike_linus.Just think of the selfie you can get with this pole! or imaging a great video at a family event! all of a sudden this pole mount becomes very powerful.I have included the proper settings for the openscad nut maker, in case you wish to modify the threaded section length or diameter.Update 10-18-2020 - I added V3 (with the nut holder slot, and closed a error gap in the original design. ) You will want to chase the screw holes with a 13/64ths drill bit to get a good clean passage for your bolt. Print SettingsPrinter brand:MakerBotPrinter:MakerBot Replicator 2XRafts:Doesn't MatterSupports:Doesn't MatterResolution:300 microns (course)Infill:60%Filament brand:inlandFilament color:blackFilament material:ABSNotes:I used 0.1 micron (fine resolution) and 50% fill. You may wish to use a higher fill. You do not want the thing breaking with a $400 GoPro on it. 50% produces a very clean print. (I tried with 0.3 micron (course) resolution, and 100% but it was so sloppy, the spacing was off on the GoPro fit.takes about 30 minutes to print. you will want to chase the screw holes with a 13/64ths drill bit to get a good clean passage for your bolt.Post-Printingkey words gorpro, painting extension, pole extension rod mount holder camera selfy pole.